![Dobinsons Rear 15mm Poly Coil Spacer for 4Runner (4th/5th Gen), FJ Cruiser, Prado 120/150, Lexus GX470/460(PS59-4025) - Lolo Overland Outfitting](http://camplolo.com/cdn/shop/products/PS59-4023-Poly-Spacer_09c3757a-2663-4d62-9a5d-1ffe9ca3c782_{width}x.jpg?v=1708416519)
Dobinsons Rear 15mm Poly Coil Spacer for 4Runner (4th/5th Gen), FJ Cruiser, Prado 120/150, Lexus GX470/460(PS59-4025)
1 review
/
Shipping calculated at checkout.
- High Quality Polyurethane, maintains height over time
- Perfect fit on top of OE isolator
- Sold as 1 piece
- Lasts longer than rubber
- Easy to add lift height to correct for vehicle lean
--
This is a single rear poly coil spacer to help correct for vehicle lean once a vehicle has been lifted, if a lean exists. It is 15mm (0.6") thick. This will add the same amount of lift as its thickness to help level up the vehicle. These CANNOT be stacked, only 1 can be used per coil spring. These will suit all rear coil springs that use the factory top rubber coil spring isolator, for these vehicles: 4Runner - 2003 to 2019 (4th and 5th Gen) FJ Cruiser - all years Lexus GX470 and GX460 - all years Prado 120 and 150 - all years
This coil spacer is also ideal for vehicles with KDSS, as offset height rear coils, or a spacer on top of one side if even height coils are used, is recommended. Remember: New Toyota vehicles come with a 1/4" to 1/2" lean from the factory, so anything within that range is considered "OK". R
Rey Manalac Perfect!